Setting Eq Controls; How To Listen To Your Iphone Or Ipod - Altec Lansing inMotion iMT630 User Manual

Setting eQ Controls

How to Select Your Desired EQ Preset
On the remote control, press the button that corresponds with your desired
EQ setting:
• ROCK
• POP
• HIP HOP
• ALTEC EQ

How to Listen to Your iPhone or iPod

1
Dock your iPhone or iPod in
the Altec Lansing inMotion
iMT630 speaker system.
2
Turn on your speaker
system.
3
Select your audio source:
iPod.
4
Find your desired song.
5
Start playing your song.
6
Adjust the volume.
NOTE To conserve battery power, reduce the speaker system volume level.
NOTE During battery-only operation, the speaker system automatically
shuts down if no audio is detected for a few minutes. This is to conserve
battery power. Press the button to turn the speaker system back on.
NOTE Whenever your iPhone or iPod is docked and your Altec Lansing
inMotion iMT630 speaker system is plugged into an AC outlet, your iPhone
or iPod is charging (until fully charged)—even if the speaker system is
switched off.
NOTE The speaker system is compatible with the alarm clock and sleep
timer features built into the iPhone and iPod. For these features to work
properly and play through the speaker system, the speaker system must
be connected to a wall outlet and turned on. When an iPhone or iPod is
docked, the speaker system will not shut down automatically, enabling the
alarm or sleep timer to play through the speaker system. See the user guide
for your iPhone or iPod for details on how to access these features.
NOTE During AC operation, if there is no iPhone or iPod docked and
no audio input signal is detected for a few minutes, the speaker system
automatically shuts down to conserve energy. Press the
the speaker system back on.
button to turn
9