Full-Featured Remote Details; Getting Started - Altec Lansing inMotion iMT630 User Manual

Full-featured Remote Details

NOTE For best results, aim the full-featured remote toward the inMotion
iMT630 speaker system.
Power on/off button
Source button
Track back button
Volume decrease button
Menu down button
Menu back button
Rock EQ button
Hip Hop EQ button

Getting Started

How to Set Up Your Speaker System
1
Lower the stand.
Lower the stand that's on the back of your speaker system.
Mute button NOTE Your Altec Lansing inMotion iMT630 speaker is equipped with a
unique stand that supports your speaker system when opened, and when
closed, switches off the speaker system to conserve battery power and
Play/pause button
encloses the full-featured remote's storage compartment.
2
Place the speaker system on a hard surface.
Track forward
button
Place your Altec Lansing inMotion iMT630 speaker system on a desk,
bookshelf, counter, or other hard surface.
Volume increase
button
3
eject the dock connector.
Depress and release the dock connector. It's on the front of the
Menu up button
speaker system with the Altec Lansing logo on it. The dock connector
will extend into position.
Select button
WARNING In order to prevent accidentally dropping your iPhone or iPod,
be sure to remove it from the dock connector before picking up the speaker
Pop EQ button
system.
Altec EQ button
How to Install the AC Adapter
4
Connect the AC adapter cable plug
into the speaker system's jack.
The jack is located on the back of
the system behind the stand/remote
storage compartment door.
5
Plug the AC adapter into the wall
outlet.
5