Dish Network 311 User Manual page 49

If you enter the correct password, you can access the locked item or open
the
System Locks
If you exit a locked item or close the
the password again to access the item or open the menu again.
If you forget your password, you will need to call the Customer
Service Center. You may need to provide the following
information: (1) your name; (2) your address; (3) your telephone
number; (4) the receiver serial identification number; and (5)
your Personal Identification Number (PIN), if used.
C P
REATING A ASSWORD
You must lock the receiver for any receiver
effect. To lock the receiver, you must first create a password. If you forget
your password, you will need to call the Customer Service Center.
To create a password:
1. Press the MENU button to display the
2. Select the
Locks
: If the receiver displays a message prompting you to
Note
enter a password, the receiver has already been locked.
3. Select the
Lock System o
message prompting you to enter a password.
: If this option appears as
Note
the receiver is already locked.
4. Enter and verify a password, using the number pad buttons. The
receiver displays stars (*) as you enter the digits of the password.
5. Memorize your password. From now on, you must enter this password
to lock or unlock the receiver. Write it down and put it in a safe place.
6. Highlight and select the
locks you have set are now in effect.
menu.
System Locks
option to display the System Locks menu.
ption. The receiver displays a
Unlock System
option. Re-enter the password. All the
OK
menu, you must enter
you set to take
Parental Locks
menu.
Main
instead,
Using Locks
Page 43