Dish Network 311 User Manual page 46

Chapter 3
Using the System
Page 40
D E
ELETING AN VENT
1. Press the MENU button.
2. Select the
Timers
The receiver displays the
3. Select an event timer that you want to delete. A check mark appears in
the box next to the event timer.
4. Move to
Delete
5. Repeat these steps for any other timer(s) that you want to delete.
R E T
EVIEWING VENT
You can review event timers by using the Event Timer Management menu.
1. Press the MENU button.
2. Select the
Timers
3. The receiver displays the
C VCR E
REATING VENT
To use VCR Event Timers, you must connect the receiver's back panel
audio/video outputs to the audio/video inputs on the VCR.
Then, you must set up the receiver to control the VCR. If the receiver can't
control the VCR, use the
channel you want to record, and use the timers built into the VCR to start
and stop the VCR at the right times.
T
IMER
option.
Event Timer Management
and press SELECT on the remote.
IMERS
option.
Event Timer Management
T
IMERS
timer type to tune the receiver to the
Auto/Ext
menu.
menu.