Table of Contents
Advertisement
VLAN Parameters:
Action Parameters:
88
IP Protocol Value: Default: 255
IPTTL: (Time To Live) How many routers a datagram can
pass through. Each router decrements this value by 1 until it
reaches 0 when the datagram is discarded. This keeps
misrouted datagrams from remaining on the Internet forever.
Range: Any / Non-zero / Zero
Any: Including all conditions for IPTTL
Non-Zero: Including IPTTL is Non-Zero
Zero: Including IPTTL is zero
IP Fragment: (IP Fragmentation Flag) Controls datagram
fragmentation together with the identification field. The
flags indicate whether the datagram may be fragmented,
whether the datagram is fragmented, and whether the current
fragment is the final one.
Range: Any / Yes / No
Any: Including all IP fragment case
Yes: The ingress frame is fragmented packet
No: The ingress frame is not fragmented packet
IP Option: A list of optional specifications for security
restrictions, route recording, and source routing. Not every
datagram specifies an options field.
Range: Any / Yes / No
Any: Including all IP option case
Yes: The ingress frame is specified IP options
No: The ingress frame is not specified IP options
SIP Filter: (SIP Source IP Address)
Range: Any / Host / Network
Any: Including all source IP address
Host: Only one specific source host IP address
Network: A specific IP subnet segment under the source IP
mask
SIP Address: Default: 192.168.1.1
SIP Mask: Default: 255.255.255.0
DIP Filter: (DIP Destination IP Address)
Range: Any / Host / Network
Any: Including all destination IP address
Host: Only one specific destination host IP address
Network: A specific IP subnet segment under the destination
IP mask
DIP Address: Default: 192.168.1.254
DIP Mask: Default: 255.255.255.0
VLAN ID Filter: Range: Any / Specific
Any: Including all VLAN IDs
Specific: According to following VLAN ID and Tag Priority
setting for ingress classification
VLAN ID: Range: 1-4094
Tag Priority: Range: Any / 0-7
Any: Including all Tag Priority values
0-7: The Tag Priority Value is one of number (0-7)
When the ingress frame meets above ACL ingress
classification rule you can do the following actions:
VigorSwitch G2240 User's Guide
Advertisement
Table of Contents
