Draytek VigorSwitch G2240 User Manual page 91

Vigorswitch
Hide thumbs Also See for VigorSwitch G2240:
Table of Contents

Advertisement

0: The ingress ARP/PARP frames where the Hardware size
is not equal "0x6" or the Protocol size is not equal "0x4"
1: The ingress ARP/PARP frames where the Hardware size
is equal "0x6" and the Protocol size is "0x4"
IP: Range: Any / 0 / 1
Any: Both 0 and 1
0: The ingress ARP/PARP frames where Protocol type is not
equal "0x800"
1: The ingress ARP/PARP frames where Protocol type
is equal "0x800"
Ethernet: Range: Any / 0 / 1
Any: Both 0 and 1
0: The ingress ARP/PARP frames where Hardware type is
not equal "0x100"
1: The ingress ARP/PARP frames where Hardware type
is equal "0x100"
IP Parameters:
This selection appears when Frame Type = IPv4 and IP
Protocol Filter = Any)
IPTT: (Time To Live): How many routers a datagram can
pass through. Each router decrements this value by 1 until it
reaches 0 when the datagram is discarded. This keeps
misrouted datagram from remaining on the Internet forever
Range: Any / Non-zero / Zero
Any: Including all conditions for IPTTL
Non-Zero: Including IPTTL is Non-Zero
Zero: Including IPTTL is zero
IP Fragment (IP Fragmentation Flag): Controls datagram
fragmentation together with the identification field. The
flags indicate whether the datagram may be fragmented,
whether the datagram is fragmented, and whether the current
fragment is the final one.
Range: Any / Yes / No
Any: Including all IP fragment case
Yes: The ingress frame is fragmented packet
No: The ingress frames is not fragmented packet
IP Option: A list of optional specifications for security
restrictions, route recording, and source routing. Not every
datagram specifies an options field.
Range: Any / Yes / No
Any: Including all IP option case
Yes: The ingress frame is specified IP options
No: The ingress frame is not specified IP options
SIP Filter: (SIP Source IP Address)
Range: Any / Host / Network
Any: Including all source IP address
Host: Only one specific source host IP address
Network: A specific IP subnet segment under the source IP
mask
SIP Address: Default: 192.168.1.1
SIP Mask: Default: 255.255.255.0
VigorSwitch G2240 User's Guide
85

Advertisement

Table of Contents
loading

Table of Contents