Table of Contents
Advertisement
2
.
1
.
5
I
P
C
o
n
f
i
2
.
1
.
5
I
P
C
o
n
f
i
IP configuration is one of the most important configurations in the switch. Without the
proper setting, network manager will not be able to manage or view the device. The switch
supports both manual IP address setting and automatic IP address setting via DHCP server.
When IP address is changed, you must reboot the switch to have the setting taken effect
and use the new IP to browse for web management and CLI management.
Function name:
IP Configuration
Function description:
Set IP address, subnet mask, default gateway and DNS for the switch.
30
to the starting date and the ending date. For example, if you
set the day light saving to be 1 hour. When the time passes
over the starting time, the system time will be increased one
hour after one minute at the time since it passed over. And
when the time passes over the ending time, the system time
will be decreased one hour after one minute at the time since
it passed over.
The switch supports valid configurable day light saving time
is –5 ~ +5 step one hour. The zero for this parameter means
it need not have to adjust current time, equivalent to in-act
daylight saving. You don't have to set the starting/ending
date as well. If you set daylight saving to be non-zero, you
have to set the starting/ending date as well; otherwise, the
daylight saving function will not be activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function
Daylight Saving and described in detail.
Day Light Saving Start:
This is used to set when to start performing the day light
saving time.
Mth:
Day:
Hour:
Day Light Saving End:
This is used to set when to stop performing the daylight
saving time.
Mth:
Day:
Hour:
g
u
r
a
t
i
o
n
g
u
r
a
t
i
o
n
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
VigorSwitch G2240 User's Guide
Advertisement
Table of Contents
