Table of Contents
Advertisement
QCE Configuration
The QCL consists of several QoS Control Entries (QCEs) that are searched from the top of
the list to the bottom of the list for a match. The first matching QCE determines the QoS
classification of the frame. The QCE ordering is therefore important for the resulting QoS
classification algorithm. If no matching QCE is found, the default QoS class is used in the
port QoS configuration.
64
0x880B
PPP, Point-to-Point Protocol.
GSMP, General Switch Management
0x 880C
MPLS, Multi-Protocol Label Switching
0x8847
MPLS, Multi-Protocol Label Switching
0x8848
PPPoE, PPP Over Ethernet (Discovery
0x8863
PPPoE, PPP Over Ethernet (PPP
0x8864
LWAPP, Light Weight Access Point
0x88BB
0x88CC
LLDP, Link Layer Discovery Protocol.
0x8E88
EAPOL, EAP over LAN.
0x9000
Loopback (Configuration Test Protocol)
0xFFFF
Protocol.
(unicast).
(multicast).
Stage).
Session Stage).
Protocol.
reserved.
VigorSwitch G2240 User's Guide
Advertisement
Table of Contents
