Table of Contents
Advertisement
MAX. Age:
Forward Delay:
MAX. Hops:
Port Config
Port:
Path Cost:
Priority:
Hello Time:
Admin Edge:
VigorSwitch G2240 User's Guide
32768 / 36864 / 40960 / 45056 / 49152 / 53248 / 57344 /
61440
6-40sec, same definition as in the RSTP protocol.
4-30sec, same definition as in the RSTP protocol.
6-40sec. It's a new parameter for the multiple spanning tree
protocol. It is used in the internal spanning tree instances.
"CIST Remaining Hops" or "MSTI Remaining Hops" in the
Spanning tree protocol message would decreased by one
when the message is propagated to the neighboring bridge. If
the Remaining Hops in a message is zero, the message
(BPDU) would be regarded as invalid. Max Hops is used to
specify the initial value of the Remaining Hops for Regional
Root Bridge (Either CIST Regional Root or MSTI Regional
Root)
1-24
1 – 200,000,000
The same definition as in the RSTP specification. But in
MSTP, this parameter can be respectively applied to ports of
CIST and ports of any MSTI.
0 / 16 / 32 / 48 / 64 / 80 / 96 / 112 / 128 / 144 / 160 / 176 /
192 / 208 / 224 / 240
The same definition as in the RSTP specification. But in
MSTP, this parameter can be respectively applied to ports of
CIST and ports of any MSTI.
1 / 2
In contrast with RSTP, Hello Time in MSTP is a per port
setting for the CIST.
Yes / No
The same definition as in the RSTP specification for the
CIST ports.
121
Advertisement
Table of Contents
