Table of Contents
Advertisement
Ingress Unit:
Egress Enabled:
Egress Rate:
Egress Unit:
2
.
6
.
4
S
t
o
r
m
C
2
.
6
.
4
S
t
o
r
m
C
Function name:
Storm Control Configuration
Function description:
The switch support storm ingress control function to limit the Flooded, Multicast and
Broadcast to prevent storm event happen.
Parameter description:
Port #:
Frame Type:
Status:
Rate (pps):
VigorSwitch G2240 User's Guide
There are two units for ingress rate limit: kbps / Mbps
Shaper enabled to limit egress bandwidth by egress rate.
The configurable shaper rate range:
500 Kbps ~ 1000000 Kbps
1 Mbps ~ 1000 Mbps
There are two units for egress shaper rate limit: kbps / Mbps
o
n
t
r
o
l
o
n
t
r
o
l
Port number.
There three frame types of storm can be controlled: Flooded
unicast / Multicast / Broadcast.
The function means to enable the frame type for Storm
control.
Refer to the following rate configurable value list, the unit is
Packet Per Second (pps).
1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1K / 2K / 4K /
8K / 16K / 32K / 64K / 128K / 256K / 512K / 1024K
67
Advertisement
Table of Contents
