Table of Contents
Advertisement
PVLAN:
GVRP-P:
Port Members:
Add new VLAN:
Delete
Note: If you need to use PVLAN( Private VLAN) function on Switch, you need to follow
up the process as below:
1. Create a VLAN as primary VLAN and the VLAN ID is 2 and evoke the Private VLAN
to enable Private VLAN service.
2. Assign port member to the VLAN2.
3. You need to assign these ports for member of port isolation.
4. Press the "Save" to complete the PVLAN configuration process.
VigorSwitch G2240 User's Guide
You enable IGMP on the interfaces that connect the system
to its hosts that are farther away from the root of the tree.
These interfaces are known as downstream interfaces.
Private VLAN ID identifier. Each Private VLAN group has
a unique VID. Private VLAN contains switch ports that
cannot communicate with each other but can access another
network. It appears only in tag-based and Double-tag mode.
GVRP Propagation identifier. GVRP allows the propagation
of VLAN information from device to device. With GVRP, a
single switch is manually configured with all the desired
VLANs for the network, and all other switches on the
network learn those VLANs dynamically.
This is used to enable or disable if a port is a member of the
new added VLAN, "Enable" means it is a member of the
VLAN. Just tick the check box ( ) beside the port x to
enable it.
Please click on <Add new VLAN> to create a new
Tag-based VLAN. Input the VLAN name as well as VID,
configure the SYM-VLAN function and choose the member
by ticking the check box beside the port No., then, press the
<Apply> button to have the setting taken effect.
Just press the <Delete> button to remove the selected group
entry from the Tag-based group table.
47
Advertisement
Table of Contents
