Heat & Glo LCOR-HVB-CE Installer's Manual page 38

Only for Model: LCOR-HVB-CE
1 2 3
CAUTION: Logs are fragile. Carefully remove the logs from the packaging. Logs #4 and #5 are the same log.
See Service Parts pages for individual assembly photos.
LOG #1 (SRV2068-700):
front corner. Position so that the bottom grooves fit over bars and the log is snug against the grate tabs.
LOG #2 (SRV2068-701):
placement. Place log against grate tabs on fourth and fifth bars.
38
4
6
5
1
Place log #1 in front of grate tabs on the third and fourth grate bars on the right
2
Locate log #2 in right rear corner of the log grate using bottom grooves for
Heat & Glo • PIER/ST/L&RCOR-HVB-CE • 2068-900 Rev. H • 6/07
TABS