Heat & Glo LCOR-HVB-CE Installer's Manual page 37

LOG #4 (SRV2068-703):
placement. Align log #4 by using the grate corner and rear cross bar as stops.
1
5
2
LOG #5 (SRV2068-703):
careful not to reposition log #2 when placing this log.
LOG #6 (SRV582-705):
grate assembly as shown.
4
Place log #4 in the right rear corner of the log grate using bottom grooves for
Place log #5 on top of flat spot on log #1 and against the inside of log #2. Be
3
6
Position log #6 on top of the groove in log #3 with the forked end resting on the
Heat & Glo • PIER/ST/L&RCOR-HVB-CE • 2068-900 Rev. H • 6/07
37