Heatilator Gas Fireplace GDCL4136I Owner's Manual page 62

B B
Figure 11. Placement of Log #2
STEP 2. Log #2 (SRV2129-705):
Log #2 on the indentation on Log C. Log #2 will rest on the tip of Log B. Slide the bottom of Log #2 up to the edge of the
burner as shown in Figure 12.
Figure 13. Placement of Log #3
STEP 3. Log #3 (SRV2129-707):
Log 3 should extend beyond Log #2 by one inch.
62 Heatilator • GDST4336I, GDFL4136I, GDCR4136I, GDCL4136I • 2129-900 Rev. F • 11/08
2 2
C C
Locate portion of Log #2 that is highlighted in Figure 11. Place that portion of
3 3
Place Log #3 so that it rests on the indentations located on Log #2 and Log D.
B B
Figure 12. Placement of Log #2
Figure 14. Placement of Log #3
2 2
BURNER BURNER
EDGE EDGE
C C
3 3
D D
2 2
1 in. 1 in.