Log Assembly - Heatilator Direct Vent Gas Appliance CNXT4236IH Owner's Manual

Place the Rockwool
• See Figures 14.1 and 14.4.
• Place a small amount of 1/2 in. diameter pieces
(dime-size) of rockwool on the burner pan so that
rockwool touches but does not cover the holes in the
burner pan.
• It is not necessary to use the entire bag. Save the
remaining amount for future use.
Figure 14.4 Placement of Rockwool
Heatilator • Caliber CNXT Series • 4047-132 Rev U • 11/08
G. Log Assembly
• Base logs have been permanently mounted on the grate
assembly and should not be moved.
Figure 14.5 Base Logs
• Install "Y" log on left hand side of grate using locating
pins to position.
Figure 14.6 Placing Left Top Log
• Install right top log as shown in Figure 14.7 using locating
pins to position log properly.
Figure 14.7 Placing Right Top Log
61