Assigning Footswitches; Assigning Pedals To The A-E Footswitches - DigiTech iPB-10 Owner's Manual

Assigning Footswitches

Assigning Footswitches

Assigning Pedals to the A-E Footswitches

1. If the Pedalboard window is not already active, select
it by touching the Pedalboard icon.
2. Touch the Edit button to display the Edit screen.
3. Touch the effect pedal you would like to assign to the
footswitch and drag it into the desired footswitch slot.
You will notice that the pedal is now visible in the
assigned slot and an icon has appeared over the pedal
indicating which footswitch the pedal is assigned to.
4. Once all pedal assignments have been made, touch
the Performance button to get back to Performance
mode.
5. From Performance mode you can easily see which
pedals are assigned to each of the A-E footswitches
(see adjacent picture). Pressing any footswitch
will turn it's assigned pedal on and off and the A-E
footswitch LEDs will provide status for each pedal.
To remove a footswitch assignment, simply drag the pedal up out of the assigned slot.
NOTE:
1.
3.
5.
2. & 4.
37