Setting The Time And Calendar; Displaying The Calendar/Time - Alpine iDA-X305S Owner's Manual

Setting the Time and Calendar

1
Press and hold (FUNCTION/SETUP) for at least
2 seconds to activate the SETUP selection mode.
2
Rotate the Double Action encoder to select
"General", and then press
BLUETOOTH General
Audio
3
Rotate the Double Action encoder to select
"Clock Adjust", and then press
The calendar setting mode is activated.
When the year is set, proceed step 5.
4
Rotate the Double Action encoder to select year,
month, day, hour or minutes to be set.
5
Press /ENTER.
The year setting mode is activated, and the year blinks.
(When "year" is set)
6
Rotate the Double Action encoder to set year, and
then press /ENTER.
The setting for year is complete. (When "year" is set)
7
Repeat steps 4 to 6 above to set month, day, hour
and minutes.
8
Press and hold for at least 2 seconds to return to
normal mode.
• Only when Auto Clock is set to OFF, can the setting be made. Refer
to "Setting the Time to automatically Adjust" (page 10).
• Pressing during the procedure will return to the previous mode.
/ENTER.
Display iPod Tuner
/ENTER.

Displaying the Calendar/Time

Press VIEW.
The calendar/time is displayed. Pressing
return to normal mode.
• Selecting any tuner or iPod/iPhone function while in the clock
priority mode will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds before the
time returns to the display.
• When the RDS mode is set, radio text can be displayed. Refer to
"Displaying Radio Text" (page 11).
• If an iPod/iPhone is connected, the album cover screen can be
displayed. Refer to "Changing the Display" (page 14).
• In Auxiliary/Auxiliary+ mode,Calendar/Time is not displayed.
Controllable With Remote Control
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
VIEW again will
7
-EN