Turning Mute Mode On/Off (Int Mute); Setting Tone Defeat For External Devices (Int Audio); Setting The Changer Name (Chg Name); Setting The Aux Mode (V-Link) - Alpine iDA-X305S Owner's Manual

Turning Mute Mode On/Off (Int Mute)

Int Mute On (Initial setting) / Int Mute Off
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When BLUETOOTH is set to Adapter, Int Mute cannot be set. Refer
to "Setting the BLUETOOTH Connection (BLUETOOTH IN)"
(page 22).
• When the BLUETOOTH INTERFACE is connected, set Int Mute to
Off.

Setting Tone Defeat for External Devices (Int Audio)

Int Audio On / Int Audio Off (Initial setting)
When inputting external devices to this unit, turning tone defeat on will
bypass Bass Frequency, Treble Frequency, High Pass Filter, i.e., sound
for external devices is output at the default setting.

Setting the Changer Name (CHG Name)

CHG (Initial setting) / PMD
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHG1 Name/CHG2 Name is
displayed, and the setting can be made respectively.

Setting the AUX Mode (V-Link)

AUX IN On / AUX IN Off (Initial setting)
You can input TV/video sound by connecting an optional Versatile Link
Terminal (KCA-410C) to this component.
You can change the AUX name display when AUX IN is set to ON.
When "AUX IN" is set to On, select the "AUX Name" mode by rotating
the Double Action encoder, then press
After that, rotate the Double Action encoder to select the desired AUX
name, then press /ENTER.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
then press BAND/TA to select your desired device.

Setting the AUX+ Mode

AUX+ On / AUX+ Off (Initial setting)
You can input the audio of an external device, (such as a Portable audio
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
AUX+ On: Set to On when an external device is connected. If
SOURCE is pressed and Auxiliary+ is selected,
the sound of the external device is input to the unit.
AUX+ Off: Set to Off when a BLUETOOTH INTERFACE is
connected.

AUX+ Audio Level Adjustment (AUX+ IN GAIN)

High (Initial setting) / Low
High: Increases the external input audio level
Low: Decreases the external input audio level
/ENTER.
SOURCE to select AUX mode and

Connecting to an External Amplifier (Power IC)

Power IC On (Initial setting) / Power IC Off
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Power IC Off: Use this mode when the front and rear pre-
amplifiers of the unit are used to drive an external
amplifier connected to the speakers. In this
setting, the head unit's internal amplifier has no
output to drive speakers.
Power IC On: The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
Off.

Setting the Language (Language)

For US / For EU1 (Initial setting) / For EU2 / For Japan / Other
Set the language to be displayed on the unit. Set to "For EU1" / "For
EU2" to use the setting.
For US: English, French, Spanish
For EU1: Russian, English
For EU2: English, German, French, Spanish, Italian,
Swedish, Portuguese
For Japan: Japanese, English
Other: Chinese (Chinese standard), English

Demonstration (Demo)

Demo On / Demo Off (Initial setting)
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to Demo OFF.
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left
23
-EN