Adjusting Volume 8 Setup; Lowering Volume Quickly; Setting The Time And Calendar; Listening To Radio - Alpine cda-9886 Quick Reference Manual

Adjusting Volume
Radio
• The initial mode is Distance mode.
listening to Radio
J
Preset buttons
(1 through 6)
C\IENT
:!:::3IESC
,I
>~
..
DIstance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Loeslmode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Msnusl mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
~
or
~
to tune In the desired station.
Holding down
~
or
~
will change the frequency
continuously.
• If Digital Seek is set to ON, the SEEK UP/DOWN functions only stop
on digital station frequencies while receiving HD radio. Refer to
"Digital Seek ON/OFF Setting" (page 21).
Rotary encoder
SOURCE/<!>
~/III
~ BAND
TUNE/A.ME
" .: ••
--~
•• : .'... 'X:' "'::';::
-",.,.-+=, ....
_~
..- ... ...
~ ~ ' ;
I
r---.1 '/
I_!:.. ~~_.
••••- -
, ..'y""--;:
, .
~
This unit cannot receive HD Radio signals (digital terrestrial radio). In
order to activate the digital radio functions described below. an optional
HD Radio Tuner module must be connected through the Ai-NET bus,
1
Press SOURCE/<!> to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
Is displayed.
FM1 ~ FM2 ~ AM ~ FM1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) ~ LOCAL (Local mode) ~
MANUAL (Manual mode)
~
DX
*J
Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
,,2
Only when XM Radio is connected.
oJ Only when SIRIUS Radio is connected.
,.4
Only when HD Radio is connected.
3
Turn the Rotary encoder to select Clock Adjust,
and then press C\ lENT.
4
Turn the Rotary encoder to set year.
S
Press
~
lENT.
6
Repeat steps 4 and 5 above to set month, day, hour
and minute.
7
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing :!:::3IESC returns to the previous SETUP mode.
• If no operation is performedfor
60
seconds, SETUP is canceled.
• To synchronize the clock to another clocklwatch or radio time
announcement, press and hold C\IENT for at least 2 seconds after
setting the "hour". Minutes will reset to 00. If the display shows over
"30" minutes when you do this, the time will advance one hour.
Setting the Time and Calendar
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the General
mode, and then press C\/ENT.
Bluetooth*J
H
General
H
Display
H
XM,,2/SIRIUSoJ
H
HD Radio,.4
H
Bluetooth
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to Its
previous level.
lowering Volume Quickly
Turn the Rotary encoder until the desired sound Is
obtained.
8-EN
Adjusting Volume
Radio
• The initial mode is Distance mode.
listening to Radio
J
Preset buttons
(1 through 6)
C\IENT
:!:::3IESC
,I
>~
..
DIstance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Loeslmode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Msnusl mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
~
or
~
to tune In the desired station.
Holding down
~
or
~
will change the frequency
continuously.
• If Digital Seek is set to ON, the SEEK UP/DOWN functions only stop
on digital station frequencies while receiving HD radio. Refer to
"Digital Seek ON/OFF Setting" (page 21).
Rotary encoder
SOURCE/<!>
~/III
~ BAND
TUNE/A.ME
" .: ••
--~
•• : .'... 'X:' "'::';::
-",.,.-+=, ....
_~
..- ... ...
~ ~ ' ;
I
r---.1 '/
I_!:.. ~~_.
••••- -
, ..'y""--;:
, .
~
This unit cannot receive HD Radio signals (digital terrestrial radio). In
order to activate the digital radio functions described below. an optional
HD Radio Tuner module must be connected through the Ai-NET bus,
1
Press SOURCE/<!> to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
Is displayed.
FM1 ~ FM2 ~ AM ~ FM1
3
Press TUNE/A.ME to select the tuning mode.
DX (Distance mode) ~ LOCAL (Local mode) ~
MANUAL (Manual mode)
~
DX
*J
Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
,,2
Only when XM Radio is connected.
oJ Only when SIRIUS Radio is connected.
,.4
Only when HD Radio is connected.
3
Turn the Rotary encoder to select Clock Adjust,
and then press C\ lENT.
4
Turn the Rotary encoder to set year.
S
Press
~
lENT.
6
Repeat steps 4 and 5 above to set month, day, hour
and minute.
7
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing :!:::3IESC returns to the previous SETUP mode.
• If no operation is performedfor
60
seconds, SETUP is canceled.
• To synchronize the clock to another clocklwatch or radio time
announcement, press and hold C\IENT for at least 2 seconds after
setting the "hour". Minutes will reset to 00. If the display shows over
"30" minutes when you do this, the time will advance one hour.
Setting the Time and Calendar
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the General
mode, and then press C\/ENT.
Bluetooth*J
H
General
H
Display
H
XM,,2/SIRIUSoJ
H
HD Radio,.4
H
Bluetooth
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to Its
previous level.
lowering Volume Quickly
Turn the Rotary encoder until the desired sound Is
obtained.
8-EN