Table of Contents
Advertisement
If the Login Camera dialog box appears, make sure to enter the correct User Name and Password and click on the
"OK" button and the camera will be added into IPView SE in list format. If the User Name and Password are entered
incorrectly, the camera will not be added into IPView SE.
The above dialog box will appear only if the administrator has already set the User Name and Password during the Web
Configuration setting.
If you forget to highlight the camera you wish to add, a dialog box will appear to notify you of the error.
Make sure to save any changes you have made to keep the information updated.
Note 2:
You can only add one camera at a time.
When the user adds the network camera, four icons will appear: "Assign IP to Camera", "Connect / Disconnect", "Erase",
"Extra Information"
71
Advertisement
Table of Contents
