Attach The External Power Adapter - Hawking HNC300 User Manual

Wired/wireless-g network camera

Hide thumbs Also See for HNC300:

Table of Contents

Attach the External Power Supply

Attach the external power supply to the DC power input connector located on the rear panel of the camera. The input

connector is labeled "DC 5V". Connect it to your local power supply.

Note:

Confirm that the device is receiving power by making sure that the "Power" LED is illuminated.

Please Note: Once you have configured your HNC320G camera so that it is connected to your existing wireless network

(i.e. you have configured it with all the correct wireless settings), you can then remove the Ethernet cable.

Table of Contents

Hnc320g