Hawking HNC720G Specification Sheet

C A R E F R E E M U L T I M E D I A
Monitor and Secure Your Home or Office from Anywhere in the World !
TM
The Hawking Net-Vision HNC720G is a high performance Wireless-G standalone camera
system with its own built-in CPU and web server, and thereby provides an ideal solution for remote
monitoring, surveillance, or sending live video over the Internet. The camera allows remote access
and management from anywhere in the world via the Internet or an existing LAN, and supports
both the Wireless 802.11g/b and 10/100Mbps Wired Fast Ethernet standards.
The Hawking HNC720G features a CCD image sensor and MPEG-4 compression to provide superior
quality picture and streaming video at up to 30 frames per second. Remote-motion technology can
be utilized via web interface or remote control, and allows the camera to pan across 270 degrees,
as well as tilt through 90 degrees. Users can scan a desired area from the safety and comfort of a
remote location. Built-in motion detection adds an extra measure of security. Included with the
camera is a powerful management and control software application that allows the user to playback
video, record directly to the hard drive, operate remote-motion control, and trigger automatic
recording via motion detection. A built-in microphone also enables audio monitoring.
The network camera features a built-in web server and utilizes its own IP address, thereby
eliminating the need to be attached to a PC. The cameras connect directly to an existing Ethernet
network, allowing users to view live video both from within their local area network (LAN) or from
outside the network via the Internet. Versatile and full-featured, the HNC720G offers a broad
array of applications and can be used to monitor various critical locations such as homes, offices,
banks, schools, childcare centers, hospitals, and other industrial and public areas.
System Requirements:
· CPU: Pentium III, 800 MHz or above (required for use with application software)
· Supported Operating Systems: Win 98SE, Win2000, WinME, WinXP
· VGA Card Resolution: 800 x 600 or above
· Internet Explorer 5.x or above
W i r e l e s s -G
CCD N e t w o r k Ca m e r a
C O N N E C T W H E R E V E R Y O U W A N T
R e m o t e -M o t i o n
• W H E N E V E R Y O U W A N T
HNC720G
Superior Quality CCD Image Sensor,
with MPEG-4 Compression
Remotely Controlled Pan/Tilt Function
Fully Compatible with 802.11g/b Networks
PACKAGE CONTENTS:
One HNC720G Wireless-G Remote-Motion
w
CCD Network Camera
One Installation CD-ROM
w
One Quick Installation Guide
w
Two Antennas
w
One DC Power Adapter
w
One RJ-45 Ethernet Cable
w
One IR Remote Controller
w