Vertical And Horizontal Position - Runco LightStyle LS-12HBd Installation & Operation Manual

Table 3-3 lists the available lens options for the LS-12HBd and their associated throw
ratios.
Table 3-3. LS-12HBd Lens Options and Throw Ratios (Note 1)
Throw Ratio
Lens Option with Primary
Lens Only
Proteus 1
0.77 (Fixed)
Proteus 2 1.45 - 1.74
Proteus 3
1.74 - 2.17
Proteus 4
2.17 - 2.90
Proteus 5
2.90 - 4.34
Proteus 6 4.34 - 6.76
Notes:
1. Due to normal manufacturing variances, throw distance can vary by up to +/- 5 percent from
these specifications.
2. Only the Proteus 2, 3, 4, 5 and 6 lenses can be used with the optional anamorphic lens. Doing
so affects the throw distances as shown here.
Proper placement of the projector relative to the screen will yield a rectangular,
perfectly-centered image that completely fills the screen.
Ideally, the projector should be positioned perpendicular to the screen and in such a way
that the lens center is aligned with either the top or bottom edge of the screen area, and
centered horizontally. See Figure 3-2.
LightStyle™ LS-12HBd Installation/Operation Manual
Throw Range in
Throw Ratio
inches, with
with Primary
117x65.8-inch (1.78:1)
Screen
Anamorphic
Minimum Maximum
For rear-screen installa-
tions only. Contact
Runco Technical Support
for more information.
169.65 203.58
203.58 253.89
253.89 339.30
339.30 507.78
507.78 790.92
Throw Range in
inches, with
156x65.8-inch (2.35:1)
Lens and
Screen
Lens
Minimum
Not Applicable
(Note 2)
1.09 - 1.30 170.04
1.30 - 1.63 202.80
1.63 - 2.17 254.28
2.17 - 3.26 338.52
3.26 - 5.07 508.56
23
Maximum
202.80
254.28
338.52
508.56
790.92
Vertical and Horizontal
Position
Installation