Runco LightStyle LS-12HBd Installation & Operation Manual page 46

Installation
1. Do not use the mounting screws provided with the ceiling
Caution
mounting kit. Use only the hardware provided with the Transport
Assembly Attachment plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Attachment Points
for Security Hooks
Installing the Anamorphic Lens Transport Assembly: After installing the Transport
Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the
Anamorphic Lens Transport Assembly.
Hardware for Attachment Plate
and Ceiling Mount Plate (4 Places):
Screw, Phillips PH,
M4 x 30mm
Lock Washer
Flat Washer
5/8" Nylon Spacer
30 LightStyle™ LS-12HBd Installation/Operation Manual
Ceiling Mount Plate
Attachment Plate
Projector (bottom)