Fluke 566 Technical Data

Fluke 566 and 568
Thermometers
Two-in-one infrared and contact thermometers
with an innovative dot matrix display.
Just when you thought advanced IR tem-
perature measurement should be easier!
With a straight-forward user interface and
soft-key menus, the Fluke 566 and 568
make even complex measurements easy.
Quickly navigate and adjust emissivity, start
data logging, or turn on and off alarms,
with just a few pushes of a button.
With a rugged, easy-to-use, ergonomic
design, the Fluke 566 and 568 can stand
up to tough industrial, electrical, and
mechanical environments.
•
Measure -40 °C to 800 °C /-40 °F to 1472 °F (568)
or -40 °C to 650 °C/-40 °F to 1202 °F (566)
•
Easily access advanced features with the soft-key
buttons and graphical display
•
Measure smaller objects from further away, with a
distance-to-spot ratio of 50:1 (568) or 30:1 (566)
•
Compatibility with all standard miniconnector
K-type thermocouples allows you to preserve
your thermocouple investments
•
Confidently measure a wide variety of surfaces
with the adjustable emissivity feature, including
a built-in material table
•
Capture up to 99 points (568) or 20 point (566) of
data, for downloading and recalling later
•
Easily trend and analyze data with included
FlukeView Forms software (568)
®
•
See your data right away without leaving the
site, using the USB (568) and your laptop for
"Hands-free" datalogging
•
Confidently troubleshoot equipment with 1 %
measurement accuracy
•
Versatile interface with six languages from which
to choose
•
Two-year warranty

Technical Data