Trigger Lock; Laser - Fluke 568 EX User Manual

568 EX
Users Manual
To set the high or low alarm:
1. Push the Menu softkey until Alarm shows as the right
softkey.
2. Push the Alarm softkey to access the Alarm menu.
3. Push the Hi or Lo softkey as necessary.
4. Push the ON or OFF softkey to turn the alarm on or off.
5. Use the Set softkey to access the Hi or Lo Alarm Set menu.
6. Use the down or up softkeys to change the alarm setting.
7. After the settings are completed, push the Done softkey.

Trigger Lock

The Product trigger can be locked on for continuous measurement.
To lock the trigger:
1. Push the Menu softkey until the lock symbol () shows as the
left softkey.
Push the  softkey to lock the trigger. The lock symbol shows
2.
on the display. When the trigger is locked, the  softkey
changes to . Push this softkey to unlock the trigger.

Laser

The Product has a laser for aiming purposes only. The laser turns
off when the trigger is released.
To enable or disable the laser:
1. Push the Menu softkey until Laser shows as the right softkey.
2. Push the Laser softkey to enable or disable the laser.
 shows on the display when the laser is enabled.
10