Main Mix Level Dial; Output Level Led Display; Power Led; Phantom Led - Alto AMX-100FX User Manual

4.9 MAIN MIX LEVEL Dial

This specific dial sets the amount of signal sent
either to the main out socket or to the tape output.

4.10 OUTPUT LEVEL LED Display

This stereo 4 segments LED meter will indicate the
level of the overall output signal.

4.11 POWER LED

This LED indicates when the power is on in your
AMX-100(FX).

4.12 PHANTOM LED

This LED indicates when the phantom power is
switched on.

4.13 TAPE Switches

-. 2TK TO CTRL ROOM
Engaging this switch to route the 2 TRACK IN signal
into the control room output.
-. 2TK TO MIX
Engaging this switch to route the 2 TRACK IN signal
into the main output.

4.14 2TK IN Control

This control is used to adjust the level of 2TK IN signal, which can be varied from -

4.15 AUX RTN (DFX) Control

This control is used to set the level of effects that received from the stereo AUX RETURN connectors or provided
by internal digital effects (for AMX-100FX model), which can be varied from -
gain for low level effects.

4.16 AUX SENDS Control

This control is used to determine the master AUX SEND levels, which can be varied from -
12
13
14
15
16
17
18
19
20
18
-
0
19
-
0
20
-
L
13
R
-
11
2TK IN
2TK TO
MAX
CTRL ROOM
AUX RTN
2TK TO MIX
TAPE
+15
0
PHONES
AUX SENDS /
CTRL ROOM
-
+15 MAX
OUTPUT LEVEL
-20 0 +5
CLIP PH
PWR
+15
MAIN MIX LEVEL
12
to MAX.
to +15dB. It can offer the further
to +15dB.
16
17
21
15
14