Yamaha RX-A1030 Owner's Manual page 89

■
Dialogue Adjust (Dialog Adjust)
Adjusts the volume or perceive height of dialogue sounds.
❑ Dialogue Level (Dialog Lvl)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you
can turn up its volume by increasing this setting.
Setting range
0 to 3
Default
0
❑ Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is
coming from below the TV screen, you can raise its perceived height by increasing this
setting.
• This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when front presence
speakers are used.
– Virtual Presence Speaker (VPS) (p.53) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
Default
0
Ideal position
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
■
Extended Surround (EXTD Surround)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Settings
Automatically selects the most suitable decoder if signals that contain
Auto (Auto) surround back channel signals are input, and reproduces the signals
(default) in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
bPLIIx Movie
IIx Movie decoder. This setting is available only when two surround
(bPLIIxMo)
back speakers are connected.
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
bPLIIx Music
Logic IIx Music decoder. This setting is available only when one or two
(bPLIIxMu)
surround back speakers are connected.
Automatically selects the Dolby EX or DTS-ES decoder, and
EX/ES (EX/ES)
reproduces signals in 6.1- or 7.1-channel.
Always reproduces signals in their original channels. (Even when
Off (Off) DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set "Extended Surround" to "bPLIIx Movie" or "EX/ES" when playing
back those sources.
■
Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
❑ Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
• This setting is applied separately to each input source.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
89
En