Yamaha RX-A1030 Owner's Manual page 82

■
Connecting an HDMI-compatible device to
play back videos/audio
Connect an HDMI-compatible device (such as a TV) to play back
videos/audio at Zone2. If you connect an AV amplifier, you can
enjoy multi-channel playback in another room (Zone2).
• To watch videos played back on a video device at Zone2, you need to connect the
video device to the unit with an HDMI cable (p.31).
• We recommend that you disable HDMI Control on the playback devices connected
to the unit.
• On-screen operations are not available for Zone2.
HDMI OUT 2
(ZONE OUT) jack
The unit (rear)
OUT
2
ETWORK
HDMI OUT
( 3 NET )
AV 1 AV 2 (ZONE OUT) A
1 2
ARC (ZONE OUT) (1 BD/DVD) HDMI
COMPONENT VIDEO
2 AV 3 AV 4
AV OUT MONITOR OUT/ Y P P Y P
B R AV 3 B
ZONE OUT
AV 1
A
AV 2
B
AV 4
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4 MULTI CH INPUT
(2 TV) CENTER
FRONT SURROUND SUR. BACK SUBWOOFE
AXIAL 3 OPTICAL 4 OPTICAL 5 OPTICAL 6 COAXIAL
SURROUND
R
ANTENNA
HD Radio (4 RADIO)
AM
(Example: using an AV amplifier)
Main zone
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2, set "HDMI
OUT2 Assign" (p.113) in the "Setup" menu to "Zone2".
• Videos/audio interruptions may happen in another zone when any of the
following operations is performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings (such as "Extended Surround")
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2
HDMI input
HDMI
HDMI
Zone2
PLAYBACK ➤ Playing back music in multiple rooms (multi-zone)
82
En