Yamaha RX-A1030 Owner's Manual page 28

1 2 3 4 5 6 7 8 9
TV connection
■
Connection Method 2 (HDMI Control-compatible TV)
Connect the TV to the unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
• The following explanation is based on the assumption that you have not changed the "HDMI" parameters
(p.109) in the "Setup" menu.
• HDMI Control is available only on the HDMI OUT 1 jack.
HDMI OUT 1 jack
HDMI OUT
1 2
ARC (ZONE OUT)
The unit (rear)
HDMI
DC OUT NETWORK
5V 0.5A ( 3 NET ) HDMI OUT
AV 1
1 2
ARC (ZONE OUT) (1 BD/D
PHONO AV 1 AV 2 AV 3 AV 4
AV OUT MONITOR OUT/
(1 BD/DVD) Y P B
ZONE OUT
AV 1
A
GND
AV 2
B
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4
L (2 TV)
R
AUDIO 1
(2 TV)
FRONT
1 COAXIAL 2 COAXIAL 3 OPTICAL 4 OPTICAL 5 6
OPTICAL COAXIAL
L
ANTENNA
HD Radio (4 RADIO)
FM AM
75Ω
R
5 OPTICAL
O
AUDIO 1
(OPTICAL or AUDIO)
jacks
• By connecting a TV to the unit with an HDMI cable, any video input to the unit can be output to the TV,
regardless of the method used to connect the video device to the unit. For details, see "Video signal flow"
(p.140).
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.31).
HDMI input
HDMI
HDMI
AUDIO
L
L
R
R
TV
OPTICAL
O
Audio output
(digital optical or analog stereo)
❑ Necessary settings
To use HDMI Control, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit, TV, and
playback devices.
2
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press ON SCREEN.
ON
SCREEN OPTION OPTION
ON SCREEN
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
c Use the cursor keys to select "Setup" and press ENTER.
d Use the cursor keys (e/r) to select "HDMI".
e Use the cursor keys (q/w) to select "HDMI Control" and press ENTER.
f Use the cursor keys to select "On".
g Press ON SCREEN.
PREPARATIONS ➤ Connecting a TV
28
En