Mac Address Filter - Yamaha RX-A1030 Owner's Manual

6
To save the changes, use the cursor keys to select "OK" and press ENTER.
7
To exit from the menu, press ON SCREEN.
■
Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off (default) Disables the network standby function.
Enables the network standby function.
On
(The unit consumes more power than when "Off" is selected.)
■

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.
❑ Filter
Enables/disables the MAC address filter.
Settings
Off (default) Disables the MAC address filter.
Enables the MAC address filter. In "MAC Address 1–10", specify the
On MAC addresses of the network devices that will be permitted access
to the unit.
❑ MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted
access to the unit when "Filter" is set to "On".
■
Procedure
1
Use the cursor keys (q/w) to select "MAC Address 1–5" or "MAC Address 6–10"
and press ENTER.
2
Use the cursor keys (q/w) to select an MAC address number and press ENTER.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
To confirm the setting, press ENTER.
5
To save the changes, use the cursor keys to select "OK" and press ENTER.
6
To exit from the menu, press ON SCREEN.
■
Network Name
Edits the network name (the unit's name on the network) displayed on other network
devices.
■
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the
entry.
• To clear the entry, select "CLEAR".
3
Use the cursor keys to select "OK" and press ENTER.
• To restore the default setting, select "RESET".
4
To exit from the menu, press ON SCREEN.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
111
En