Mute; Adjust The Volume; Use Sensors; Play Or Pause Streaming Audio - Plantronics Voyager Legend User Manual

Mute

Adjust the volume

Use sensors

Play or pause streaming
audio
• if the caller is unknown, unlisted, or blocked
• if your phone doesn't support PBAP
NOTE Cantonese, Danish, Japanese, Korean, Russian and Swedish do not have native language caller
announcement support.
During a call, you can mute the microphone.
Tap the Mute button. You will hear "mute on" confirmation. An alert repeats every 15 minutes
to remind you of microphone mute. Tap the Mute button
hear "mute off" confirmation.
Toggle the Volume button
™
Smart Sensors technology in this headset recognizes if the headset is being worn and can
automatically perform time-saving functions.
Putting on your headset will:
• Answer an incoming call
• Transfer an active call from your phone
• Resume streaming audio
Taking off your headset will:
• Reject an incoming call
• Transfer an active call to your phone handset
• Pause streaming audio
• Lock the Call button to avoid accidental calls
Reset Sensors
You may need to reset the sensors if they are not working as expected.
1 Test Wearing the headset, tap the Call button to test sensors.
A talk time voice alert means sensors are working. A tone means sensors need to be reset .
2 Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for
more than 10 seconds.
A 2-second press of the Play/Pause button
streaming audio.
NOTE
You must pause your streaming audio before you:
• use your headset's voice commands
• initiate an outbound call with your headset (call back or voice dial)
NOTE
If you power off the headset or go out of phone range while streaming audio, your headset
will not play/pause the stream upon reconnecting until you manually resume streaming with your
phone.
up (+) or down (–) during a call or while streaming audio.
will either pause or resume playback of
again to open the microphone and
10