Contents What's in the box Headset overview Charge case overview Pair Bluetooth pairing NFC pairing Pair Another Phone Select language Charge Use the charge case Adjust the fit The Basics Make/Take/End Calls Mute Adjust the volume Use Smart Sensors Play or pause streaming audio More Features Voice alerts Voice commands...
Charge case overview IMPORTANT Fully charge the charge case prior to use. Charge case LEDs; indicates case/headset battery status Headset: Swipe charge case for headset battery status Charge case: Swipe charge case for headset battery status Micro USB charge port...
Pair NOTE If your phone supports Near Field Communication (NFC), go to NFC pairing. Bluetooth pairing Wearing your headset, power it on. You hear “welcome” in all the supported languages and then "pairing" in the default language. The headset LED flashes red and blue. ®...
Select language Once your headset is paired and connected to your phone, you can change the headset language. Wearing your headset, power it on. Press and hold the Volume up + and down – buttons together until you hear “welcome." The language selection directions repeat in every supported language.
Charge It takes 90 minutes to fully charge the headset. The indicator light turns off once charging is complete. To reset the accuracy of the talk time prompt, deplete the headset battery then charge fully. To check the headset battery status, tap the Call button while wearing your headset or tap the Voice button and say “check battery.”...
Battery status LEDs for charge case and headset Battery high Battery medium Battery low Battery critical; Recharge case/headset A fully charged case can supply an additional 11 hours of headset talk time. IMPORTANT Fully charge the charge case prior to use. Check the charge case or headset battery status by swiping either the case or headset icons.
Adjust the fit The loop of the gel eartip tucks into the back curve of your ear for a stable fit. With the headset powered off, replace the eartip with one of the two alternate sizes if it feels loose or tight in you ear. To adjust the fit, rotate the eartip on the headset or add the optional clip-on earloop.
Tap the Call button to end current call. Reject a call Choose: • Say “ignore” after call is announced, or • Press Call button for 2 seconds Call back last call Double-tap the Call button Voice dial (phone feature) If your smartphone has a voice-enabled assistant, press the c wait for phone prompt.
Caller Announcement (mobile phone only) When wearing your headset, you will hear the name of a contact calling you so you can decide whether to answer or ignore the call without having to check the phone screen. An incoming caller name is announced: •...
Disable sensors To disable the sensors, hold both the Voice and Call buttons for more than 6 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue. NOTE Sensors cannot be disabled while streaming audio. Play or pause streaming A 2-second press of the Voice button will either pause or resume playback of streaming...
• Select a new headset language using your headset (see Select language)* • Download and install the HUB app on your phone (visit plantronics.com/apps)* • Download and install the MyHeadset Updater tool (visit plantronics.com/myheadset) NOTE * To install a new language that is not listed on your headset or in the HUB settings, download and install the MyHeadset updater tool (visit plantronics.com/myheadset).
If you choose to not answer the second call, it will go to voicemail. Change headset settings You can change the headset settings two different ways. • Download and install the HUB app on your phone (visit plantronics.com/apps)* • Download and install the MyHeadset Updater tool (visit plantronics.com/myheadset) NOTE * To install a new language that is not listed in the HUB settings or to install firmware updates, download and install the MyHeadset updater tool (visit plantronics.com/myheadset).