Contents Overvi ew Headset Charge stand* USB Bluetooth adapter Connect and pair Connect to PC Configure USB adapter Pair to mobil e device 5 Pair USB adapter again Fit and charge 7 Wear on the right or left 7 Charge your headset 7 Check headset battery status 7 Load software 8 The basics...
Charge stand* NOTE *Contents may vary by product. NOT E Both the charge stand and micro USB cable can be plugged into either a computer or wall charger. It is only necessary to plug the charge stand into a computer to update firmware. USB Bluetooth adapter USB LE Ds What they m ean...
Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality. NOTE Plantronics Hub software also allows you to customize your headset' s behavior through advanced settings and options. Configure USB adapter Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to configure your Bluetooth USB adapter.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Pair USB adapter again Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. Put your headphones in pair mode.
Fit and charge Wear on the right or left To position the microphone on the right or left side, r otate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side.
Install Plantronics Hub for Windows and Mac onto your computer by visiting plantronics.com/ software. Manage your headset settings with your computer or mobile device with Plantronics Hub for Windows and Mac or Plantronics Hub for iOS and Android, respectively (plantronics.com/ software).
The basics ([ ]) Volume up/dow n Track backw ard* Play/pause music* Track forw ard* Active noise cancelling Charge port Active call = mute/unmute Idle = OpenMic (hear your surroundings) Headset LEDs for pairing, battery status, online indicator Call button ([ ]) Pow er button Bluetooth pair button NOT E...
If you have muted an active call and you start to speak, then a desktop notification reminds you that you are on mute. You can add a voice prompt notification by managing your mute features with Plantronics Hub for Windows and Mac. OpenMic While not on a call, tap the red Mute button to activate OpenMic and hear your surroundings.
• Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue NOTE Sensors cannot be disabled while streaming audio. Active Noise Cancelling (A NC) reduces external noise and enhances your mus ic and sound quality.
Disconnect your headset from other devices; this includes unplugging your USB adapter from the computer. Open Plantronics Hub for Windows/Mac and check the Updates tab for fir mw are update alerts. • Do not answer or place a call during the update...
What's in the box Contents may vary by product. Headset Charge stand Bluetooth USB Adapter Carrying case Micro USB cable Accessories Sold separately at plantronics.com/accessories. Wall charger...
Mute button for four seconds while not on a call, until you hear "Wideband stereo off." You can also change the setting in Plantronics Hub for Windows/Mac by going to Settings > Wireless > Extended Range Mode...
Page 15
The headset talk time is not Charge the headset fully to reset the accuracy of the talk time prompts. accurate. I hear an echo when not on a call. Check and see if OpenMic is on by pressing the red mute button on the boom when you are not on a call.