Flash Measurement With Cord; Setting Up Of The Flash Measurement With Cord And Making Measurement In This Mode - Sekonic FLASHMATE L-308BII Operating Instructions Manual

7.1 Setting up of the flash measurement with cord and making
measurement in this mode
Caution:
Set up the shutter speed which has been already set up on your camera.
l
If you measure the flash bulb light, make sure that the shutter speed set is within
l
the synchronizing range.
terminal (Fig. 22).
Caution:
aperture value is displayed (Fig. 23).
N O T E S
ically recalculated and redis
* Synchro cord (optional):
A 5-meter-long synchro cord with three plugs is available
for synchronous metering between your L-308Bll, the
camera and the flash unit. It is very convenient as no
cord replacement is required during shooting pictures.
The L-308Bll is also equipped with a connector terminal
lock for securing cable connection.

7 . . Flash Measurement with cord

Fig. 21
- J
Fig. 22
To flash unit A To camera
8