Flash Light Wireless Measurement - Sekonic FLASHMATE L-308BII Operating Instructions Manual

8. Flash Light Wireless Measurement

(Measurement without using the syrchro cord)
8.1 Flash light wireless measurement
Caution:
Set up the shutter speed which has been already set up on your camea.
blinks showing that your L-308BII is in a stand-by mode
(Fig.25); this holds for about 90 seconds.
displays an aperture value (Fig.26). After firing, the
stand-by mode holds for another 90 seconds, You can
repeat measuring so long as the mark is blinking.
make another measurement.
Caution:
NOTES
Fig. 24
mark
Fig. 25
ount is small relative to
flash measurement with