Squelch; Level Squelch; Voice Squelch; Rf Amplifier, Attenuator - AOR AR2300 Operating Manual

3-10 Squelch

3-10-1 Level squelch

LQ LQnnn
HQ HQnnn mmm
To read: LQ <CR> or HQ<CR>
Response: LQnnn

3-10-2 Voice squelch

VQ VQn
VT VTnnn
VL VLnn
To read: VQ <CR> or VT<CR> or VL<CR>
Response: VQn

3-11 RF amplifier, attenuator

AT ATn
n=0
n=1
n=2
n=3
n=2
To read: ATy <CR>
Response: ATmn

3-12 Antenna select

AN ANn
n=0
n=1
n=2
To read: AN <CR>
Response: ANmn
Note: When the receive frequency is below 25MHz, antenna connector 2 is
automatically selected.
27
nnn: 000 ~ 255
nnn:000 ~ 255 (for receive frequency above 25MHz)
mmm: 000 ~ 255 (for receive frequency below 25MHz)
or HQnnn mmm
n: 0, 1
nnn:000 ~ 255 Delay time (default: 008)
nn: 0 ~ 7 Squelch level (default: 3)
or VTnnn or VLnn
n: 0 ~ 4 (default: 0)
RF AMP = On, Attenuator = 0 dB, Auto attenuator = Off
RF AMP = Off, Attenuator = 0 dB, Auto attenuator = Off
RF AMP = Off, Attenuator = -10 dB, Auto attenuator = Off
RF AMP = Off, Attenuator = -20 dB, Auto attenuator = Off
Auto attenuator = On
m : 0, 1 0: Auto attenuator On
1: Auto attenuator Off
n : 0 ~ 3 See above
n: 0 ~ 2 (default: 1)
Auto select
Antenna connector 1
Antenna connector 2
m : Antenna select setting
n : 1, 2 Antenna connector
(default: 000)
(default: 000)
(default: 000)
0: Off (default) 1: On