Table of Contents
Advertisement
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time the
system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up procedure.
If a fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps. The
numbers on the fatal error list (on the following page) correspond to the number of
beeps for the corresponding error. All errors listed, with the exception of Beep Code 8,
are fatal errors.
Beep Code
1 beep
5 short, 1 long
1 long, 8 short
Appendix A
Table A-1. AMIBIOS Error Beep Codes
Error Message
Refresh
Memory error
Video error
Description
Circuits have been reset (Ready to power up.)
No memory detected in system
Video adapter disabled or missing
A-1
Advertisement
Table of Contents
