System Time/System Date; Advanced Settings Menu - Supermicro H8DMT User Manual

H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User's Manual

System Time/System Date

You can edit this field to change the system time and date. Highlight System Time or
System Date using the <A
the <T > key or the <A
AB
in DAY/MM/DD/YYYY format. The time is entered in HH:MM:SS format. Please note
that time is in a 24-hour format. For example, 5:30 A.M. appears as 05:30:00 and 5:30
P.M. as 17:30:00.
4-4

Advanced Settings Menu

The submenus in the A
Table 4-12 below.
Menu Item
Quick Boot
Quiet Boot
OS Installation
Interrupt 19 Capture
Wait for F1 if Error
ACPI Mode
Advanced ACPI Configuration Submenu
MCP55 ACPI
HPET Table
ACPI Version
Features
ACPI APIC
Support
AMI OEMB Table
Headless Mode
General WHEA Configuration Submenu
> keys. Enter new values through the keyboard. Press
RROW
> keys to move between fields. The date must be entered
RROW
S
DVANCED ETTINGS
Table 4-1. BIOS Features Submenu
Description
If Enabled, this option will skip certain tests during POST to reduce the time
needed for the system to boot up. The options are Enabled and D
If Disabled, normal POST messages will be displayed on boot-up. If Enabled,
this display the OEM logo instead of POST messages.
Change this setting if using a 64-bit Linux operating system. The available
options are Other and L
Select Enabled to allow ROMs to trap Interrupt 19. The options are E
Disabled.
This setting controls the system response when an error is detected during the
boot sequence. When enabled, BIOS will stop the boot sequence when an error
is detected, at which point you will need to press the F1 button to re-enter the
BIOS setup menu. The options are Enabled and D
Use this setting to determine whether ACPI mode will be used. The options are
Yes and N .
O
Determines whether to enable or disable the MCP55 ACPI HPET table. Options
are Enabled or D
ISABLED
Use this setting the determine which ACPI version to use. Options are ACPI
v1.0, ACPI 2.0 and ACPI
V
Determines whether to include the ACPI APIC table pointer in the RSDT pointer
list. The available options are Enabled and D
Determines whether to include the AMI OEMB table pointer in the RSDT pointer
list. The available options are Enabled and D
Use this setting to E
NABLE
This setting is used to update the ACPI FACP table to indicate headless
operations without a monitor.
menu are listed in
.
INUX
.
3.0.
V
ISABLED
ISABLED
or Disable headless operation mode through ACPI.
4-2
Table 4-1 through
ISABLED
NABLED
.
ISABLED
.
.
.
and