Table of Contents
Advertisement
H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User's Manual
Overheat LED
Connect an LED to the JOH1 header to provide warning of chassis overheating. See the
table below for pin definitions.
Chassis Intrusion
A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you
of a chassis intrusion. See the table below for pin definitions.
Wake-On-LAN
The Wake-On-LAN header is designated JWOL. You must have a LAN card with a
Wake-On-LAN connector and cable to use the Wake-On-LAN feature. See the table
below for pin definitions.
SMBus Header
The header at SMBus is for the System Management Bus for the H8DMT-F/
H8DMT-IBXF Serverboards. Connect the appropriate cable here to utilize SMB on the
system. See the table below for pin definitions.
Pin#
Definition
1
3.3V
2
OH Active
Pin#
Definition
1
Intrusion signal
2
Battery voltage
Pin#
Definition
1
+5V Standby
2
Ground
3
Wake-up
Pin#
Definition
1
Data
2
Ground
3
Clock
4
No Connection
2-12
Advertisement
Table of Contents
