Drive Bay Installation/Removal; Accessing The Drive Bays - Supero SUPERSERVER 5017C-MF User Manual

S S
UPER ERVER 5017C-MF User's Manual
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

DVD-ROM/Serial ATA Drives: For installing or removing the DVD-ROM or SATA
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Note: The DVD drive is optional and does not come pre-
installed in the system. Only a "slim" DVD-ROM will fi t in the 5017C-MF.
Serial ATA Drive Installation
The SATA drive is not hot-swappable, meaning system power must be turned off
before installing or removing.
1. First power down the system and then remove the top cover of the chassis as
described on page 6-7.
2. Unscrew the retention screw at the top center of the drive, then push the
drive tray out from the back until you can grasp and pull it out through the
front of the chassis.
Figure 6-2. System Cooling Fans
6-4