Supero SUPERSERVER 5017C-MF User Manual page 39

3. Once the CPU is loose, remove the it from the CPU socket.
4. Clean the surface of the CPU and the heatsink, removing the used thermal
grease. Reapply the proper amount of thermal grease on the surface before
re-installing the CPU and the heatsink.
Loosen screws in the
sequence shown
Screw #1
Motherboard
Figure 5-3. Installing the Heatsink
Figure 5-4. Removing the Heatsink
5-5
Chapter 5: Advanced Motherboard Setup
Screw #4
Screw #3
Screw #2