Table of Contents
Advertisement
5-10 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each Giga-
bit LAN port, the yellow LED indicates
activity when blinking while the other LED
may be green, amber or off to indicate the
speed of the connection. See the table on
the right for the functions associated with
the connection speed LED.
IPMI Dedicated LAN
In addition to the LAN ports, a dedicated
IPMI LAN port is also included on the
X9SCL-F. The yellow LED on the right
indicates activity, while the green LED
on the left indicates the speed of the
connection. See the tables at right for
more information.
Onboard Standby Power LED
An Onboard Standby Power LED is
located at LE2 on the motherboard.
When LE2 is on, the AC power cable is
connected. Make sure to disconnect the
power cable before removing or installing
any component.
IPMI Heartbeat LED
An IPMI Heartbeat LED is located at LE7.
When LE7 blinks, the IPMI is functioning
properly. Refer to the table on the right
for details.
Chapter 5: Advanced Motherboard Setup
Connection Speed Indicator
LED State
Off
Green
Amber
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED
Link (left)
Activity
(right)
Onboard Standby PWR LED
LED State
Off
On
IPMI Heartbeat Indicator)
LED
Link (left)
5-21
LAN LED
Defi nition
No connection or 10 Mb/s
100 Mb/s
1 Gb/s
Color
Defi nition
Green: Solid
100 Mbps
Yellow: Blink-
Active
ing
Defi nition
System Off
System on, or
System off and PWR
Cable Connected
LED
Defi nition
IPMI is ready for use
Advertisement
Table of Contents
