Chassis Intrusion - Supero SUPERSERVER 5017C-MF User Manual

S S
UPER ERVER 5017C-MF User's Manual
Fan Headers
The X9SCL-F has fi ve fan headers (Fan1
~ Fan4 and FanA). These are all 4-pin fan
headers, however pins 1-3 are backward
compatible with traditional 3-pin fans.
A fan speed control setting in the BIOS
(Hardware Monitoring section) allows
the BIOS to automatically set fan speeds
based on the system temperature. Refer
to the table on the right for pin defi ni-
tions.
Note: Please use all 3-pin fans or all
4-pin fans on the motherboard. Do not
mix 3-pin fans and 4-pin fans on the
same board.

Chassis Intrusion

A Chassis Intrusion header is located at
JL1 on the motherboard. Attach the ap-
propriate cable from the chassis to inform
you of a chassis intrusion when the chas-
sis is opened.
ATX PS/2 Keyboard and PS/2 Mouse
Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located beside the USB
ports. See the table on the right for pin
defi nitions.
External Speaker
On the JSPK header, pins 3~4 are used
to activate the onboard (internal) speaker.
Close pins 3~4 with a jumper to use the
onboard speaker. If you wish to use an
external speaker, attach the external
speaker's cable to pins 1~4. See the table
on the right for pin defi nitions.
Pin#
1
2
3
4
Pin#
1
2
Pin#
1
2
3
4
5
6
Speaker Connector
Pin Setting
Pins 3~4
Pins1~4
5-16
Fan Header
Pin Defi nitions
Defi nition
Ground (Black)
2.5A/+12V (Red)
Tachometer
PWM_Control
Chassis Intrusion
Pin Defi nitions
Defi nition
Intrusion Input
Ground
PS/2 Keyboard and
Mouse Ports
Pin Defi nitions
Defi nition
Data
NC
Ground
VCC
Clock
NC
Pin Defi nitions
Defi nition
Internal Speaker
External Speaker