Processor And Heatsink Installation; Installing The Lga1155 Processor - Supero SUPERSERVER 5017C-MF User Manual

S S
UPER ERVER 5017C-MF User's Manual
5-2

Processor and Heatsink Installation

Notes:
•
Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
directional heatsink only.
•
Make sure to install the serverboard into the chassis before you install the CPU
heatsinks.
•
When receiving a serverboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro web site for updates on CPU support.

Installing the LGA1155 Processor

1. Press the load lever to release the load plate, which covers the CPU socket,
from its locked position.
2. Gently lift the load lever to open the load plate. Remove the plate cap.
Load Plate
Load Lever
5-2