Manually Adjusting Speaker Levels - Yamaha RX-V2400RDS Owner's Manual

Canceling the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" appears on
the front panel display.
After a few seconds, "SLEEP OFF" disappears, and the
"SLEEP" indicator goes off.
SLEEP
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.

Manually adjusting speaker levels

You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources through the MULTI CH INPUT jacks.
Please note that this operation will override the level
adjustments made in "AUTO SETUP" (page 24),
"Speaker level" (page 52) and "Using the test tone"
(page 48).
A/B/C/D/E
TV INPUT
TV VOL
TV MUTE
ON SCREEN LEVEL
2
SLEEP TEST
3
1
Set PARAMETER/SET MENU to
PARAMETER.
2
Press LEVEL repeatedly to select
the speaker you want to adjust.
FRONT L
Front left speaker level
CENTER
Center speaker level
FRONT R
Front right speaker level
SUR.R
Surround right speaker level
SUR.B.R
Surround back right speaker level
SUR.B.L
Surround back left speaker level
SUR.L
Surround left speaker level
SWFR
Subwoofer level
PRES
Presence speaker level
y
Once you press LEVEL, you can also select the speaker by
pressing k/n.
3
Press –/+ to adjust the speaker output level.
• The control range is from +10 dB to –10 dB.
Notes
• When inputting digital signals with sampling frequencies higher
than 48 kHz, only the subwoofer level can be adjusted.
• You can not adjust the speaker level by using LEVEL when
PARAMETER/SET MENU is set to SET MENU. However,
each time you press LEVEL, the current level of each speaker
appears on the front panel display allowing you to check the
speaker levels.
ADVANCED OPERATIONS
PRESET
MUTE
CH VOLUME
STEREO
DISC EFFECT
1
PARAMETER
SET MENU
PARAMETER
SET MENU
LEVEL
47