Using The Test Tone - Yamaha RX-V2400RDS Owner's Manual

ADVANCED OPERATIONS

Using the test tone

You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in "AUTO SETUP" (page 24),
"Speaker level" (page 52) and "Manually adjusting
speaker levels" (page 47). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
A/B/C/D/E PRESET
TV INPUT
TV VOL
TV MUTE
3
ON SCREEN LEVEL
SLEEP TEST
2,5
1
Set PARAMETER/SET MENU to PARAMETER.
2
Press TEST.
The unit will output a test tone.
3
Press k/n repeatedly to select the speaker
you want to adjust.
TEST LEFT
TEST CENTER
TEST RIGHT
TEST R SUR.
TEST R SUR. B
TEST L SUR. B
TEST L SUR.
TEST SUBWOOFER
4
Press –/+ to adjust speaker volumes.
5
Press TEST when you have completed your
adjustment.
The test tone stops.
y
• Use a handheld SPL meter, hold at arms length and point
upwards so that the meter is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• Before outputting the test tone, we recommend that you set the
output volume to 0 dB.
Note
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
48
4
MUTE
CH VOLUME
STEREO
DISC EFFECT
1
PARAMETER
SET MENU
Front left speaker
Center speaker
Front right speaker
Right surround speaker
Right surround back speaker
Left surround back speaker
Left surround
Subwoofer