Selecting Sound Field Programs - Yamaha RX-V2400RDS Owner's Manual

PLAYBACK

Selecting sound field programs

Front panel operation
INPUT
STANDBY
/ON
SOURCE PRESET/
/REMOTE A/B/C/D/E TUNING
DVD MD/TAPE
D–TV CD–R
SPEAKERS
MULTI CH INPUT M MODE CBL/SAT TUNER
INPUT
A B
VCR 1 CD
/VCR2
REC OUT /ZONE 2 OPTIMIZER
MIC
(U.S.A. model)
Rotate PROGRAM to select the desired program.
The name of the selected program appears on the front
panel display and on the video monitor.
V–AUX DVR/VCR2 VCR 1 CBL/SAT
J A Z Z C L U B
SP
A
Program name
Remote control operation
10 KEY/DSP
10KEY DSP
EX/ES
CHP/INDEX
TV VOL
Set 10 KEY/DSP to DSP, then press one of the
sound field program buttons repeatedly to select
the desired program.
The name of the selected program appears on the front
panel display and on the video monitor.
10KEY DSP STEREO
1
ROCK
5
EX/ES MOVIE
9
CHP/INDEX
V–AUX DVR/VCR2 VCR 1 CBL/SAT
J A Z Z C L U B
SP
A
Program name
32
VOLUME
PRESET TUNING
/TUNING FM/AM MEMORY MODE
PROGRAM
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO TONE CONTROL
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
SILENT VIDEO AUX
PROGRAM
PROGRAM
DTV DVD MD/TAPE CD–R CD TUNER
VOLUME
HiFi DSP
STEREO HALL CHURCH JAZZ
1 2 3 4
Sound field
ROCK ENTERTAIN MUSIC TV THTR
5 6 7 8
MOVIE THX /DTS NIGHT
program
9 10 +10 +100
A/B/C/D/E PRESET
buttons
TV INPUT MUTE
VOLUME
CH
TV MUTE STEREO
DISC EFFECT
HALL CHURCH JAZZ
2 3 4
ENTERTAIN MUSIC TV THTR
6 7 8
THX /DTS NIGHT
10 +10 +100
DTV DVD MD/TAPE CD–R CD TUNER
VOLUME
HiFi DSP
y
Choose a sound field program based on your listening preference,
and not on the name of the program.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with that source.
• Sound field programs cannot be selected when the MULTI CH
INPUT is selected.
• Sampling frequencies higher than 48 kHz (except for DTS 96/
STRAIGHT
24 signals) will be sampled down to 48 kHz, then sound field
EFFECT
programs will be applied.
Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1/7.1-channel playback for multi-channel
sources using the Dolby Pro Logic IIx, Dolby Digital
Surround EX or DTS ES decoders.
Press EX/ES on the remote control to switch
between 5.1- and 6.1/7.1- channel playback.
To select a decoder, press l/h repeatedly when
PLIIx Movie (etc.) is displayed.
PHONO
AUTO (AUTO)
L L R
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1/7.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1/
7.1 channels.
Decoders (select with l/h)
You can select from the following modes depending on the
format of the software you are playing.
PLIIx Movie For playing back Dolby Digital or DTS
signals in 7.1 channels using the Pro Logic IIx movie
decoder.
PLIIx Music For playing back Dolby Digital or DTS
signals in 6.1/7.1 channels using the Pro Logic IIx music
decoder.
EX/ES For playing back Dolby Digital signals in 6.1/7.1
channels using the Dolby Digital Surround EX decoder.
DTS signals are played back in 6.1/7.1 channels using the
DTS ES decoder.
EX For playing back Dolby Digital or DTS signals in 6.1/
7.1 channels using the Dolby Digital Surround EX
decoder.
OFF (OFF)
For playing back Dolby Digital or DTS signals in 5.1
channels.
PHONO
y
L L R
When SURR B L/R SP is set to "LRGx1" or "SMLx1" (see
page 51), the surround back channel will be output from the left
SURROUND BACK speaker terminals.
EX/ES
CHP/INDEX