Yamaha RX-V2400RDS Owner's Manual page 61

Parameter initialization
Use this feature to initialize the parameters for each sound
program within a sound
field
you initialize a sound program group, all of the
field
parameter values within that group revert to their initial
settings.
MANUAL SETUP > OPTION MENU >
PARAM. INI >
Press the corresponding numeric button for the sound
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
C)PARAM. INI
1
*5
9 *0 +10
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a
• You cannot separately initialize individual
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
Speaker impedance setting
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU >
SP IMP.SET >
D)SP IMP.SET
Minimum 8ohms
/ : Exit
-/+ : Select
Choices: 6ohms, 8ohms
Zone set
ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals.
MANUAL SETUP > OPTION MENU >
ZONE SET >
E)ZONE SET
SP_B;;;;;;FRONT
/ : Exit
-/+ : Select
PARAM. INI
program group. When
field
field
2 3 *4
6 7 8
sound
field program group.
sound
field
SP IMP.SET
SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you connect headphones to the PHONES jack on the unit, the
sound is output from both headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Zone 2 set
ZONE2 SET
(U.S.A., Canada and Australia models only)
MANUAL SETUP > OPTION MENU >
ZONE2 SET >
F)ZONE2 SET
OUTPUT VOL;;VAR.
ZONE2 AMP;;;OFF
/ : Up/Down
-/+ : Select
Output volume OUTPUT VOL
Use to select how the volume control will operate with
regard to the ZONE 2 OUTPUT jacks.
Choices: VAR., FIX
• Select VAR. to adjust the ZONE 2 OUTPUT volume
simultaneously with VOLUME –/+ on the remote
control.
• Select FIX to fix the ZONE 2 OUTPUT volume level
to a standard line level.
Zone 2 amplifier ZONE2 AMP
Use to select how the ZONE 2 speakers will be amplified.
Choices: ON, OFF
• Select OFF if you do not use Zone 2 speakers or if you
connect your Zone 2 speakers through an external
amplifiers connected to this unit's ZONE 2 OUTPUT
jacks.
• Select ON to use this unit's internal amplifier if you
connect your Zone 2 speakers directly to this unit's
PRESENCE/ZONE 2 speaker terminals.
SET MENU
59