Sound Field Programs; Selecting Sound Field Programs - Yamaha HTR-N5060 Owner's Manual

Hide thumbs Also See for HTR-N5060:

Service manual (142 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

Table of Contents

What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In

addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and

shape of the room in which we are sitting.

Elements of a sound field

There are two distinct types of sound reflections that combine to make up the sound field in addition to the direct sound

coming straight to our ears from the player's instrument.

Early reflections

Reflected sounds reach our ears extremely rapidly (50 ms to 100 ms after the direct sound), after reflecting from one

surface only (for example, from a wall or the ceiling). Early reflections actually add clarity to the direct sound.

Reverberations

These are caused by reflections from more than one surface (for example, from the walls, and the ceiling) so numerous

that they merge together to form a continuous sonic afterglow. They are non-directional and lessen the clarity of the direct

sound.

Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and

shape of the room, and it is this information that the digital sound field processor reproduces in order to create sound

fields.

If you could create the appropriate early reflections and subsequent reverberations in your listening room, you would be

able to create your own listening environment. The acoustics in your room could be changed to those of a concert hall, a

dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what YAMAHA

has done with the digital sound field processor.

Selecting sound field programs

Notes

• Choose a sound field program based on your listening preference, not merely on the name of the program.

• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input

source (see page 38).

• Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs

are applied.

Front panel operations

STANDBY

/ON

PRESET/TUNING

FM/AM

A/B/C/D/E

EDIT

STRAIGHT

PROGRAM

PHONES

SPEAKERS

EFFECT

TONE CONTROL

BASS/TREBLE

SILENT CINEMA

PROGRAM l / h

Press PROGRAM l / h on the front panel

repeatedly.

The name of the selected sound field program appears in

the front panel display and in the OSD.